現在改裝挖掘機加長臂已經很普遍了,不知道大家有沒有這樣的疑問,“改裝后的挖掘機加長臂是不是就能延長其使用壽命了呢?”其實這并不一定,如果沒有去保養的話,無論是挖掘機加長臂還是其他產品,使用的時長都會偏低,若平日做好加長臂的維修保養工作,則可使其擁有很長的使用壽命。
Now it is very common to modify the excavator lengthening arm. I wonder if you have such a question, "can the modified excavator lengthening arm extend its service life?" In fact, this is not necessarily the case. If the maintenance is not carried out, the service life of the extended arm of the excavator or other products will be low. If the maintenance work of the extended arm is done well on weekdays, it can have a long service life.
挖掘機加長臂長期在惡劣的環境下作業,保養加長臂可以減少加長臂故障,延長加長臂使用壽命,更好提高工作效率,使加長臂達到佳的狀態。
The lengthening arm of the excavator operates in a bad environment for a long time. Maintenance of the lengthening arm can reduce the failure of the lengthening arm, extend the service life of the lengthening arm, better improve the work efficiency and make the lengthening arm reach a good state.
1、加長大小臂每天少打兩次黃油。在泥水中作業時,若工作裝置連接銷軸浸在水中,則每次完工后都要清洗干凈再加黃油。每次作業前都要檢查工作裝置連接部位是否加滿黃油。每次加黃油后,操作動臂、斗桿和鏟斗數次,然后再加黃油,直到將舊黃油擠出為止。
1. Lengthen the big and small arms and beat butter at least twice a day. When working in muddy water, if the connecting pin of the working device is immersed in water, clean it and add butter after each completion. Before each operation, check whether the connecting part of the working device is filled with butter. After each addition of butter, operate the boom, stick and bucket several times, and then add butter until the old butter is squeezed out.

2、在海邊地區或腐蝕地區作業,操作后要徹底清洗整個機器,以除去鹽分,必要時在需要的地方加黃油或機油,以避免銹蝕。在寒冷的冬天作業,必須將液壓缸的活塞桿回到液壓缸筒內,避免泥土和水粘在活塞桿上,損壞液壓缸密封圈。
2. When working in coastal areas or corrosive areas, the whole machine shall be thoroughly cleaned after operation to remove salt. If necessary, butter or oil shall be added where necessary to avoid corrosion. When working in cold winter, the piston rod of the hydraulic cylinder must be returned to the cylinder barrel to avoid soil and water sticking to the piston rod and damaging the sealing ring of the hydraulic cylinder.
挖掘機加長臂表面與周圍介質發生化學或電化學作用而遭受破壞的現象稱腐蝕。這種腐蝕作用不但會影響機械外表設備的正常工作,而且會腐蝕到加長臂內部的零部件。如雨水、空氣中的化學物質等通過機械零部件的對外通道、縫隙等進入加長臂內部,腐蝕機械零件內部,加速加長臂磨損,增加加長臂故障。在挖掘機加長臂使用過程中,若您能夠很好的按照要求進行加長臂的使用,就能夠很好的避免加長臂出現嚴重的故障問題。
The phenomenon that the surface of the lengthening arm of the excavator is damaged by chemical or electrochemical action with the surrounding medium is called corrosion. This corrosion will not only affect the normal operation of the external equipment of the machine, but also corrode the internal parts of the lengthening arm. For example, the chemical substances in the rain and air enter the inside of the lengthening arm through the external channels and gaps of the mechanical parts, corrode the inside of the mechanical parts, accelerate the wear of the lengthening arm, and increase the failure of the lengthening arm. During the use of the excavator lengthening boom, if you can use the lengthening boom according to the requirements, you can avoid serious failure of the lengthening boom.
The above is the detailed introduction about the rental of the extended arm excavator. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://www.thesonriseranchgallery.com/