小型挖掘機在特別環境中運用較多，如埋線工程、管鋪設、挖溝作業等等。挖掘機并不總是作為一種挖掘機械，施工者有時用他們來打樁、或許用他們來鋪設管道。因而， 你必需求分外留神鏟斗的狀況，保證在打樁、破碎和行走設備有沒有問題。
Small excavators are widely used in special environments, such as buried line engineering, pipe laying, trenching, and so on. Excavators are not always used as a kind of excavation machinery, and constructors sometimes use them to drive piles or lay pipes. Therefore, you must pay special attention to the condition of the bucket and ensure that there are no problems with the piling, crushing and walking equipment.
還有一個重要的部分是鏟斗油缸聯接銷、襯套，必定要對這些當地的松緊進行查看。許多問題的發生都是由于疏于保護和查看而發生的。
Another important part is the bucket cylinder connecting pin and bushing. It is necessary to check the local tightness in an all-round way. Many problems occur due to neglect of protection and viewing.
當你開動機器移動鏟斗、斗桿和后臂時，你或許會看到銷軸或許油缸的移動，可是斗桿和鏟斗卻不動。這是由于銷軸和襯套部分呈現了松動所導致的。
When you start the machine to move the bucket, stick and rear arm, you may see the movement of the pin or cylinder, but the stick and bucket do not move. This is caused by the looseness of the pin shaft and bushing.
另一個要害點要細心察看后臂與挖掘機聯接的部分。佛山中特作業技術操練校園小編提示，假定你后臂下方的聯接磨損過度，有或許導致丟掉整臺設備的價值。
Another key point is to carefully inspect the connection between the rear arm and the excavator. According to the tips of the campus editor of Foshan Zhongte Operation Technology Training School, suppose that the connection under your rear arm is excessively worn, which may lead to the loss of the value of the whole equipment.
小型挖掘機的詳細用處中，小型挖掘機上的橡膠履帶同大型機器上的鋼制履帶不同，它適用在草地和車道上。許多時分你沒有像查看鋼制履帶那樣，近距離地查看橡膠履帶的磨損。作用你只看到橡膠履帶的磨損 、而沒有看到鏈輪和托輪上許多的磨損?？梢跃烤箍坎榭聪鹉z履帶上的裂紋和邊沿的磨損狀況來估量其運用狀況，一起留神筋的高度，就像看輪胎磨損時留神輪胎紋理相同。
Among the detailed uses of small excavators, the rubber tracks on small excavators are different from the steel tracks on large machines, which are applicable to grass and driveways. Many times, you don't check the wear of rubber tracks closely as you do steel tracks. As a result, you can only see the wear of the rubber track, but not the wear of the sprocket and the supporting roller. You can estimate the application condition of the rubber track by looking at the cracks on the rubber track and the wear condition of the edge. Pay attention to the height of the rib together, just as you pay attention to the tire texture when looking at the tire wear.
